Never fight with a fuel line or vacuum line again! Slip the BikeMaster® hose removal pliers tip between your fuel valve and the hose itself. Squeeze gently and the hose is pushed off its fitting with no damage or drama. It's almost too easy, but we'll never complain about it.
If you work on motorcycles, cars, power equipment, or you name it, you've run into stuck fuel lines and vacuum lines over and over. It's very frustrating, turning what should be a simple task into a battle. Sometimes you'll give up and cut the hose, hoping there will be enough hose left to reconnect later. But maybe there won't! It's also easy to stab yourself with screwdrivers or break parts trying to pry hoses from their fittings. Finally there's a good way to remove even the most stubborn hoses.
Recently we needed to install an in-line fuel filter on a portable generator at about twenty degrees F. If you think rubber fuel line is hard to motivate at room temperature, try it in sub-freezing temps. The BikeMaster® Hose Removal Pliers made short work of this task even in the bitter cold.
This is the most useful new tool in ages, according to our resident tool wonk. Every toolbox and garage needs a pair of these special purpose pliers.
Rugged steel construction. Lifetime BikeMaster® tool warranty.